top of page
Mains (Hardwired) Custom Length Light - choose your options

Mains (Hardwired) Custom Length Light - choose your options


Custom length copper pipe light made to your measurements, fitted with your options. Supplied with mains adapter.


Lights 60cm and longer come with 3 mounts, all lights shorter than 60cm come with 2 mounts.

Please see below for more information about the options.


The lights can be mounted in various ways, they can be angled and are strong enough to use as a rail to hang items from.


    Cable length; 1.5m / 5 foot

    Supplied with all the appropriate screws for the mounts.


    Mains Adapter

    The mains adapter is suitable for 110V or 240V at 50Hz or 60Hz. Which basically covers everywhere in the world. If you're any doubt, get hold of us through the contact page.

    The adapter requires wiring by a compentant individual who is confident wiring up mains appliances. A small screwdriver will be required.

    Mounting screws are supplied with the mains adapter.



    Choose the length you need. Bear in mind, you'll need to leave a little space for the wire at one end. If you're buying a light with a push switch, you'll need to leave a little space for that at the other as well.


    Mount Type

    3 choices. The photo's will help you out a lot with this option. The hospital brackets are easy to clean, so great for somewhere like over the hob.

    Brass Munsen Rings

    Brass Hospital Brackets

    Copper Saddle Clips

    ... all mounts are supplied with the appropriate brass screws.


    Switch Type

    No Switch - You supply an external switch or dimmer. The light will be supplied wired permanently in the 'on' position.

    On/Off Push Switch - A 'clicky-clicky' on/off push switch poking out of one end. This won't do dimming, just on or off.

    Touch Control Dimming - To switch the light on or off, tap it anywhere on it's surface. Tapping and holding will increase or decrease the brightness. It's very good.


bottom of page